PowerStroke
Clamping head with integrated short stroke function
PowerStroke
The PowerStroke can be used in any horizontal and vertical applications requiring large forces to be built up over short working distances.
Series FSK, FSKP
- Clamping Head with additional integrated short stroke function
- Ideal for pressing, stamping, joining, riveting, clinching, forming, embossing, closing molds etc.
Fast stroke and power stroke: 2 features, 2 drives
Clamping Head with integrated short stroke cylinder
The PowerStroke mold closing device has been designed to hold and pull a clamping rod in one direction – the closing direction. It can be used in all applications that require powerful forces in a short working stroke. A single unit can apply forces of up to 180 metric tons; with the force being proportional to the applied pressure. This can be hydraulic (FSK series) or pneumatic (FSKP series).
Split functionality is superior!
Produce fast and powerful movements with just one system? A weak compromise. The PowerStroke takes on the hard work with forces of up to 1800 kN. So you can use an efficient, compact, fast, and economic drive to open, close, and position molds or dies.
Function, Simulation and Design
Technical Data
Find outer dimensions, CAD files and technical data here.
Downloads
You will find a detailed product description as well as information on the correct size selection, control, design of the rod and much more in the PDF file linked here.
P11 – Dimensions, type FSK (hydraulic)Actuation
Load direction
Specific feature
Clamping via
No results
FSK Series
hydraulisch, Standard
| Type | ID no. (order no.) | Rod Ø mm | Working force kN | press. bar | Casing ∅ mm | Casing Length mm | Download | Price |
|---|---|---|---|---|---|---|---|---|
| FSK 45 | FSK 045 10 | 45 | 60 | 75 | 160 | 310 |  CAD |
 Inquiry |
| FSK 70 | FSK 070 10 | 70 | 110 | 75 | 198 | 353 | CAD |
Inquiry |
| FSK 100 | FSK 100 10 | 100 | 300 | 100 | 268 | 450 | CAD |
Inquiry |
| FSK 125 | FSK 125 10 | 125 | 650 | 160 | 328 | 600 | CAD |
Inquiry |
| FSK 160 | FSK 160 10 | 160 | 1000 | 160 | 417 | 700 | CAD |
Inquiry |
| FSK 180 | FSK 180 10 | 180 | 1400 | 160 | 476 | 770 | CAD |
Inquiry |
| FSK 200 | FSK 200 10 | 200 | 1800 | 180 | 546 | 865 | CAD |
Inquiry |
Versions for other rod diameters (incl. inch sizes) and admissible loads on request.
FSK-SVE Series
hydraulic, rod exits unit
| Type | ID no. (order no.) | Rod Ø mm | Working force kN | press. bar | Casing ∅ mm | Casing Length mm | Download | Price |
|---|---|---|---|---|---|---|---|---|
| FSK-SVE 45 | FSK 045 11 | 45 | 60 | 75 | 160 | 310 | CAD |
Inquiry |
| FSK-SVE 70 | FSK 070 11 | 70 | 110 | 75 | 198 | 353 | CAD |
Inquiry |
| FSK-SVE 100 | FSK 100 11 | 100 | 300 | 100 | 268 | 450 | CAD |
Inquiry |
| FSK-SVE 125 | FSK 125 11 | 125 | 650 | 160 | 328 | 600 | CAD |
Inquiry |
| FSK-SVE 160 | FSK 160 11 | 160 | 1000 | 160 | 417 | 700 | CAD |
Inquiry |
| FSK-SVE 180 | FSK 180 11 | 180 | 1400 | 160 | 476 | 770 | CAD |
Inquiry |
| FSK-SVE 200 | FSK 200 11 | 200 | 1800 | 180 | 546 | 865 | CAD |
Inquiry |
Versions for other rod diameters (incl. inch sizes) and admissible loads on request.
FSKP Series
pneumatic, standard
| Type | ID no. (order no.) | Rod Ø mm | Working force kN | press. bar | Casing ∅ mm | Casing Length mm | Download | Price |
|---|---|---|---|---|---|---|---|---|
| FSKP 16-S | FSKP 016 01 | 16 | 11 | 5 | 6 | 126 | CAD |
Inquiry |
| FSKP 16-Z | FSKP 016 11 | 16 | 11 | 5 | 6 | 126 | CAD |
Inquiry |
| FSKP 20-S | FSKP 020 01 | 20 | 19 | 6 | 148 | 228 | CAD |
Inquiry |
| FSKP 20-Z | FSKP 020 11 | 20 | 19 | 6 | 148 | 228 | CAD |
Inquiry |
| FSKP 25-S | FSKP 025 01 | 25 | 27 | 5 | 6 | 177 | CAD |
Inquiry |
| FSKP 25-Z | FSKP 025 11 | 25 | 27 | 5 | 6 | 177 | CAD |
Inquiry |
Versions for other rod diameters (incl. inch sizes) and admissible loads on request.
FSKP-SVEF & FSKP-SVEL Series
pneumatic, rod exits unit
| Type | ID no. (order no.) | Rod Ø mm | Working force kN | press. bar | Casing ∅ mm | Casing Length mm | Download | Price |
|---|---|---|---|---|---|---|---|---|
| FSKP 16-SVEF | FSKP 016 02 | 16 | 11 | 5 | 6 | 126 | CAD |
Inquiry |
| FSKP 16-SVEL | FSKP 016 03 | 16 | 11 | 5 | 6 | 126 | CAD |
Inquiry |
| FSKP 20-SVEF | FSKP 020 02 | 20 | 19 | 6 | 148 | 228 | CAD |
Inquiry |
| FSKP 20-SVEL | FSKP 020 03 | 20 | 19 | 6 | 148 | 228 | CAD |
Inquiry |
| FSKP 25-SVEF | FSKP 025 02 | 25 | 27 | 5 | 6 | 177 | CAD |
Inquiry |
| FSKP 25-SVEL | FSKP 025 03 | 25 | 27 | 5 | 6 | 177 | CAD |
Inquiry |
Versions for other rod diameters (incl. inch sizes) and admissible loads on request.
Fast stroke and power stroke: 2 features, 2 drives
Traditional press
A traditional press usually has a central press cylinder which generates both the power stroke and the opening and closing strokes. The same system generates the short power stroke on the one hand and the long opening and closing strokes which need only little power. As a consequence, the opening and closing strokes consume a lot of energy and are rather inefficient. Also the design of the machine frame is subject to significant limitations: The force the cylinder uses to press down has to be absorbed at the other end of the machine, i. e. the crosshead. As a consequence, this force affects the complete frame and machine portal; both have to be designed and built accordingly.
Advantages of a press with PowerStroke
The PowerStroke is the smarter and better solution! It generates the short power stroke right there where it is needed. As a consequence, the opening and closing strokes can be carried out by a compact, specialized drive system. Quickly and efficiently. Due to its intelligent design, the PowerStroke closes the mold by pulling instead of pressing as a press cylinder would do. Therefore, the closing force only affects the mold – not the complete machine frame. The press can be designed in a more compact way. Additionally, the compact design of both the PowerStroke and the drive system open new possibilities for construction. The rod can exit the PowerStroke and allow for a bigger working space. The PowerStroke operates very efficiently; therefore, the hydraulic units can be significantly smaller with less oil consumption. Also the power consumption can be reduced considerably.
- Force distribution in a confined space >
enables a lean, space-saving design - Low service needs >
due to durable components and easy replacement - Slim drive system >
reduction of costs of materials - Small hydraulic operating volume >
less energy consumption and costs - Clamping on hardened standard piston rods >
no complicated toothed racks required
Why the PowerStroke is the better solution
Generate horizontal force?
The PowerStroke can operate vertically as well as horizontally. In both cases, at first a relatively big stroke has to generated with small forces. Then, for the last millimeters, great force has to be applied. After presenting the PowerStroke to our customers, we often hear: “If only I had known about this earlier!” Now you know. From now on, using the PowerStroke, you can design your machines in a more creative way.
Testing
On one test rig, components of different sizes can be tested, for example:
- Leak test
- Load test
- Breaking test
Molding
On one machine, molds of different sizes can be used efficiently, for example:
- Castings
- Foam parts
- Injection molding
- Hydroforming
- High-volume presses
- Welding presses
Tasks
Different tasks can be carried out with the same machine concept, for example:
- Countering
- Holding down
- Fixing
- Boosting
Applications
Our know-how for your sustainability
Less energy consumption
Shorter setup and cycles
Less heat generation
Longer service life
Lower weight of the machine
Space-saving design / compact layout
Less oil consumption
Sustainability and mechanical engineering
In industry, big amounts of resources and energy are consumed; at the same time, there are big possibilities for saving. Realizing this potential not only leads to cost reductions but also demonstrates the ecological awareness of a company and can improve its public perception. We are very proud that we can make a contribution in this respect – to the benefit of our customers in the mechanical engineering industry and of the machine operators.